Marine Traffic Map

Приєднуйтесь до Telegram-каналу для моряків Морський Хаб

Search by MMSI or IMO number

Приєднуйтесь до Telegram-каналу для моряків Морський Хаб

Where do ships positions come from?

The system is based on Automatic Identification System (AIS). Receiving stations cover the entire range of 40 nautical miles (about 75 km) and periodically receive information from some more remote vessels. Read more about AIS on Wikipedia

What is the maximum coverage area?

It is difficult to determine the maximum coverage area, but it can be imagined in this example: a vessel with an AIS transmitter connected to an external antenna located at a height of 15 meters above sea level will be able to exchange a signal with the coastal AIS station at a distance of 15-20 nautical miles (approximately 28-38 km). The higher the AIS stations are, both shipboard and shore, the further the radio signal will spread.

The reception quality also depends on the type of antenna, obstacles (mountains, buildings) and current weather conditions. In some cases, ships can be seen on the map at a distance of 200 nautical miles (370 km!), if the antenna with the AIS receiver is located high enough (for example, on a mountain over 500 m).

How often is the data updated?

In general, the data on the map is updated in real time. However, the positions of some vessels may be updated with a delay, for example, when the vessel has exceeded the receiving range. Also, some items may be displayed with a delay of up to one hour, which is not a big error if the ship is in the ocean (considering the small speed of the ships and the huge distances).

Jobs for seafarers

All Jobs

Работа в море

Не ждите, пока появятся новые вакансии. Начинайте активный поиск уже сегодня!

Обновленный список крюингов Рассылка апликашки

How can I find a ship in real time?

To find a vessel on AIS map, you need to enter its name (or part of it) as shown in the pictures below. Click on the icon with the magnifying glass icon to display the input form. Then start entering the name of the vessel in the upper field, where it is written Vessel, Port.

ais-start-search.jpg How to activate ship search

If the vessel is within reach of the AIS station, its name will appear in the drop-down list. Click on the name in the list and you will see the vessel on the map.

ais-vessel-found.jpg m/v Eugen Maersk is within the AIS coverage area

If the vessel is found in the database, but at the moment is out of reach of AIS, you will see note Vessel is out of Range. Try again later.

vessel-out-of-ais-range-1.jpg m/v APL Detroit is outside of the AIS coverage area

As can be seen from the example below, the name of the vessel may be entered partially.

If the vessel is found in the database, but at the moment is out of reach of AIS, you will see note Vessel is out of Range. Try again later.

apl-vessel-suggestions.jpg Found ships with names starting with APL